Enduro Bearings 6000 LLU MAX

High-quality sealed Enduro 6000 LLU MAX ABEC 3 bearings suitable for rear full suspension wheels.

• dimensions 10x26x8 mm
• weight 19.28 g

Maximum amount of chrome steel balls

To achieve maximum load, MAX bearings are fully filled with high quality precision 10 balls. No cage means more balls and 40% more load. The bearings are filled with balls by hand due to the very small tolerance between the inside and outsideouter ring.

High carbon chrome steel rings 52100

The purest steel alloy solid like no other. MAX bearings use marine lubricant from CRC. The grease will remain in the bearing even under extreme conditions. Even salt water does not penetrate inside and does not damage the bearing.

LLU type seal

Each O-ring has two cutting edges that fit into the guide grooves in the bearing inner ring. The outer lip preventsimpurities penetrate while the inner keeps grease in the bearing. While running, this system is practically waterproof, the grease in the inner ring groove creates a waterproof barrier.